Back Panel Cable Connections - Goldmund SRCD3 User Manual

2 SETTING UP THE SRCD3
2.5

BACK PANEL CABLE CONNECTIONS

Audio Connections
The Goldmund SRCD3 is equipped in standard with the following stereo output
standard connectors:
75 Ohm RCA coaxial SPDIF connector.
o
TOSLINK optical cable output.
o
You may use these connectors to connect your player to a D/A converter or digital
preamplifier.
Goldmund recommends that the greatest care is taken when selecting the cable
linking the player to the D/A converter or digital preamplifier. The very accurate
signal provided by the SRCD3 can easily be impaired by an imperfect connection.
Use a "Goldmund Lineal™" cable from the coaxial output if you want to reach the
most accurate jitter-free connection for CD playback.
In addition, there are the following Analogue Audio Outputs:
2 x RCA (Left/Right) coaxial stereo analogue outputs.
o
6 x RCA 6 channel coaxial analogue outputs (needed for multi-channel SACD
o
connection).
User manual – Goldmund SRCD3 CD/SACD Player
P6