Genelec 8260A Overview page 6

The Powerful
Genelec DSP
Genelec 8260A and other 8200 and 7200 Series
loudspeaker systems have an independent dedicated
DSP signal processing engine in each loudspeaker. All
AES/EBU digital audio formats are supported, as well as
standard line level analog signals. The 8200/7200 Series
accepts sampling rates ranging from 32 kHz to 192 kHz.
Up to 30 loudspeakers and subwoofers can be connected
on, set up and controlled with GLM™ control network over
standard CAT5 cabling. Genelec Loudspeaker Manager™
(GLM™) is a computer software providing full real-time
control of all aspects of all loudspeakers on the network.
Fast And Easy Calibration With AutoCal™
AutoCal™ is a fully automated loudspeaker system alignment
algorithm within GLM™ software. It sets levels, distance
compensating delays, phase (for subwoofers) and room
response equalization using a factory-calibrated Genelec
measurement microphone included in the GLM™ software
kit. SinglePoint™ and MultiPoint™ microphone locations
for one, two, or three-person mixing environments can be
selected. The Interactive Response Editor provides visual
readout of measured and corrected response curves as
well as full manual editing of all acoustical settings.
All functions and settings are stored in GLM™ System
Setup Files or directly into each loudspeaker. As the
control network is separate from the audio cabling, the
control network can be dismantled and moved to another
place after saving the settings into the loudspeakers.
Furthermore, the 8200 Series loudspeakers retain all the
features and benefits of Genelec 8000 Series products and
can be used independently of the GLM™ control network.