Advertisement
In above window, select backup equipment in "Backup Device". There are two selection options: "USB Disk" and
"DVDRW/CDRW" (make your selection) and then enter the start time and the end time of the record file that you need
to backup in operation mode Select record type of the data that you need to backup in "Record Type".
System will automatically return to real-time monitoring image during data backup process. And "Backup data
process" will display on screen. After finishing backup, system will display "Backup data finished" window. By
pressing panel's "Menu" or Remote Control's "Menu" key, system will return to real-time monitoring image. Backup
operation is complete.
If you have questions:
Mailing Address:
DPS Inc.
8015 E. Crystal Dr
Anaheim, CA 92807
Website:
http://www.q-see.com
Fax:
714-998-3509
Contact Us:
Customer Service:
Phone: 877-998-3440 x 538
Email: cs@dpsi-usa.com
Live Chat from link on Q-see Website
Tech Support:
Phone: 877-998-3440 x 539
Email: ts@dpsi-usa.com
Live Chat from link on Q-see Website
R
E
V
0
6
0
4
0
9
R
E
V
0
6
0
4
0
9
Advertisement
