Info; System Maintenance30; Device Management; Hdd Management - Q-See QR4714 User Manual

5. Select EXIT to return to the SYSTEM SETUP menu

info

The INFO panel allows the user to view the system's device type, software version and MAC
address, as shown in
system maintenance
The SYSTEM MAINTENANCE menu provides access to reset the DVR to factory default
settings, update the system software (firmware), and set the system's auto-maintenance
feature.
1. From the Main Menu, select SYSTEM to open the SYSTEM SETUP menu
2. Select MAINTAIN to open the SYSTEM MAINTAIN menu (
3. To configure the DVR to automatically check for updates when the system is restarted,
click the arrow next to the SYSTEM MAINTAIN drop down menu, select ON
4. To manually check for system updates, select SYSTEM UPDATE
5. Select DEFAULT to reset all values to the original factory installed settings
6. Select APPLY to save settings
7. Select EXIT to return to the SYSTEM SETUP menu

deviCe management

The DEVICE MANAGEMENT menu, as shown in
the Hard Disk Drive, External Alarm, PTZ Cameras, Mobile Phone Monitoring, and Motion
Detection.

hdd management

IMAge 31
.
IMAge 30 IMAge 31
IMAge 32
IMAge 33
, allows access to configure
)