Port Forwarding - Q-See QSDR74RTS User Manual

Caution: a dynamic address (IP numbers) can change from time
to time depending upon your service provider. If the remote
Caution: a dynamic address (IP numbers) can change from time to time
monitoring stops working at some point, the IP address may have
depending upon your service provider. If the remote monitoring stops
changed. To check it, go to a website, such as www.myipaddress.
working at some point, the IP address may have changed. To check it, go
com, from a computer attached to the same router as the DVR to
to a website, such as www.myipaddress.com, from a computer attached
find the new IP address (Image 17). Then repeat steps 1 and 2.
to the same router as the DVR to find the new IP address (Image 17).
Then repeat steps 1 and 2.
IMAge 16
To avoid a change in IP Address by your Internet Service Provider ask your service provider for
a static IP address or use a dynamic domain name service to get a domain name that can be
linked to your dynamic address. You can register for a domain name (a name rather than an
IP number), user name, and password through our company's www.myq-see.com website.
Repeat steps 1 and 2 using the new domain name, username and password. This DVR also
supports the DDNS service provided by dyndns. For more information on how to use these
services from the myq-see.com or www.dyndns.com websites.

port Forwarding

To access the DVR from a remote computer: You need to forward ports 80 and 9000
from the router the DVR is attached to, to the IP address of the DVR.
First connect your DVR to the Router and power on DVR, then follow these steps to configure
your DVR and Set up port forwarding on your router
1. Go to www.portforward.com/qsee
2. Choose your DVR or Series (QT, QSDT, QR, QS etc) from the list provided
3. Select the make and model of your router from the list
4. Click on the 'Click here to skip this advertisement...' link in the upper right corner
of the screen.
24
WaRninG!
IMAge 17