Table of Contents
Advertisement
Introduction
Device Description
PowerPlay is a revolutionary power conditioner, which not only offers world class protection and noise
reduction, but also offers unparalleled flexibility and control from anywhere in the world.
Device Features
Advanced Control
•
Ethernet and RS-232 ports provide two way communication to the PowerPlay. These ports
enable unparalleled control, monitoring, and management of connected devices.
Simple Control
•
Infrared, 12 volt trigger and Phone communications port provide several additional methods
controlling the PowerPlay and connected devices.
Intelligent UPS Control
•
The UPS communication port enables PS Audio's revolutionary Intelligent UPS Management
control and configuration. Additionally information is also provided via the front panel of
PowerPlay and the PS Audio Global Net site when a PowerPack UPS is connected.
Power Monitoring
•
The PowerPlay monitors and reports detailed power conditions whenever the unit is connected
to PS Audio Global Net.
Noise Reduction
•
The PowerPlay contains powerful noise filtration, yet continues to deliver unimpeded current to
your components for optimal performance.
Surge Protection
•
Sophisticated surge and spike protection is contained in the PowerPlay. The protection circuitry
is designed to protect your gear from voltage irregularities. Should the protection circuitry
become compromised the PowerPlay will no longer supply power to any of the connected
components.
IsoZones
•
The PowerPlay IPC-9000 features 5 IsoZones
employs differential mode filtering to isolate connected equipment from noise which is
generated by other components. It is recommended that components be isolated by device type
4826 Sterling Drive, Boulder CO 80301
PH: 720.406.8946 service@psaudio.com www.psaudio.com
Table of Contents
TM
©2010 PS Audio International Inc. All rights reserved.
PowerPlay IPC-8000 and IPC-9000
TM
, while the IPC-8000 features 3. Each IsoZone
15-052-01-1-DOM-B
TM
Hide quick links:
Advertisement
Table of Contents
