Audio Menu - Zenith SENTRY 2 SM2726EW Operating Manual & Warranty

AUDIO MENU
............AUDIO MENU
BASS
TREBLE
BALANCE
AUDIO
SEQ
L
l
l
l
STEREO
ON
4
@
R
AUDIO MENU
AUDIO MENU-
BASS - I
TREBLE - I
BALANCE L I
SEQ ON
AUDIO MENU While
AUX Channel is Chosen
4
4"
R
BASS
TREBLE
BALANCE
AUDIO
(AUDIO mode options
are not available while
AUX channel is chosen.
The signal being
received from the
auxiliary source is
assumed to be stereo
audio. SEQ may be
switched ON or OFF
as desired.)
SEQ
(Spatial Equalization)
Adjusts the BASS (low-frequency) level.
Adjusts the TREBLE (high-frequency) level.
Adjusts the balance of sound between the left and right speakers.
Allows you to select STEREO, MONO or 2ND AUDIO/SAP speaker operation.
STEREO:
MONO:
2ND AUDIO/SAP:
To Access AUDIO MENU
Refer to the "Quick Reference to On-Screen Menus" sec-
tion for details.
NOTE: All adjustments on the AUDIO MENU are option-
Directs the sound to the left and right speakers as supplied by the
program source (broadcast TV, VCR, etc.)
Directs the same sound to both left and right speakers even if the source
being received is in stereo.
Directs the sound for the second audio program (second language) to
both the left and right speakers. SAP sound is always monaural.
Improves tonal balance and increases apparent stereo separation to produce a spacious and more
tonal sound. SEQ is only available if a stereo signal is being received and you have previously
selected STEREO using the AUDIO option.
To Adjust BASS, TREBLE and BALANCE
Press ADJUST (ADJ) Left/Right until the most plcasing
sound is heard.
To Use AUDIO Mode Options
al. You do not have to use these features in order to use
your TV.
CH2
10:56
STEREO
STEREO is selected and a
stereo signal is being received.
You will hear stereo sound.
J
Audio Mode Shown in
Channe!/Time Display
Press ADJUST (ADJ) Left/Right to select desired option.
We recommend that you use the STEREO option. The TV
will switch automatically between the STEREO and
MONO modes dependent on the signal being received.
If you prefer SAP, use the 2ND AUDIO/SAP option. On
those stations which broadcast two audio portions, you will
hear the SAP (usually a second language). When the SAP
broadcast ends, the TV switches automatically between
STEREO and MONO modes. The TV swltches baclc to
2ND AUDIO/SAP when the SAP broadcast resumes.
2732-0 7 - 1