Table of Contents
Advertisement
REMOTE
CONTROL
MODEL
MBR3430
TV OPERATIONS
The following functions and operations
apply to your
Zenith TV. The remote control must be in the TV mode to
operate your TV.
The VOLUME
control will always, adjust the TV volume
regardless of the selected operating mode of the remote.
MODE
Press repeatedly
to select the TV
mode of operation.
TV
Lights when TV mode of
operation is selected.
CAPTIONS
Used to view closed captions broadcast
with some television programs.
MENU, SELECT and ADJUST
Used with on-screen menus to see menu,
select an option, and adjust that option.
Numbered Buttons
Used to select a TV channel.
ENTER
Used to view the Channel/Time Display
or to remove any on-screen menu or
display.
PIP
Used to activate Pictu:e-In-Picture
inset. /
SWAP
Used to swap picture !inPIP inset with
/
the main television pkXure.
TIMER
Used to activate the SLEEP TIMER.
t
For optimum performance,
point the
remote control toward your TV.
SELECT
QUIT
(DE)@
@@(9
@(DE)
FLASH_
IX)
_
CHANNEL
VOLU_E
-
Remote Control MBR3430
TV Operations
OFF/ON
Used to turn TV ON or OFF.
SOURCE
Press to display the menu of TV sour-
ces for TVs having a SOURCE
Menu.
Press SOUPCE
again to step through
the source selections. On some TVs,
press SOUFtCE to select the AUX
(AuxilimT) ,-hannel.
FLASHBK (Flashback)
Press to retarn to the last TV channel
you were watching.
CHANNEL Up/Down
Used to :sequence through the TV channels.
Press CHANNEL Up or Down to change
to the next higher or lower channel.
VOLUME Up/Down
Used to adjust the volmne level of the TV.
FREEZE
Used to freeze the motion of the pic-
ture in the PIP inset.
MUTE
Used to turn off sound wtfile the pic-
ture remains. Press again to restore
the sound.
SPACIAL EQUALIZATION (SEq)
Used to select SEq audio mode on TVs
equipped with SEq feature.
2_-o
5 - 2
Advertisement
Table of Contents
