Operation; Turning The Tv On - Zenith Z44SZ80 Installation And Operating Manual

Operation

Operation
Operation
T urning the TV On
T urning the TV On
* In this manual, the OSD (On Screen Display) may be different from your TV's because it is just an
example to help you with the TV operation.
Turning on the TV just after installation
1. Connect power cord correctly. At this moment, the TV is switched to standby mode.
2. Press the POWER or CH (
INPUT, CH ( ) or Number (0 ~ 9) buttons on the Remote Control to turn the TV on.
D E
/
Turning on the TV (power cord is still connected)
1. If the TV is off without indicators on the TV
• Check the power cable.
2. If the TV was turned off with the remote control and the POWER button on the TV
• Press the POWER button on the TV or press the POWER, TV/VIDEO, TV INPUT, CH (
Number (0 ~ 9) button on the Remote Control to turn the TV on.
Note: If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
20 DLP Projection TV
) buttons on the TV front panel or press the POWER, TV/VIDEO, TV
D E
/
D E ) or
/