Table of Contents
Advertisement
MAINTENANCE
AND TROUBLESHOOTING
VCR MODE CHART
1. OUTPUT
TO TV FROM ANTENNA
OUT JACK ON VCR
ANTENNA
OR CABLE-TV
INPUT TO VCR
START)
HERE
_r
VCR POWER
/_
VCR POWER
IS OFF
/_TATUS
OF_
IS ON
\VCR P_'
ALL
ANTENNA
OR CABLE-'IV
CHANNELS
TO TV
STEREO
AUDIO
IF "IV IS
CAPABLE
SWITCH IN TV
POSITION
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO "IV
STEREO
AUDIO
IF "IV IS
CAPABLE
The operating mode of your VCR determi[nes what type of
a program source is provided, and whether the audio is
stereo or monaural. Use this flow chart to determine the
operating status of your VCR, so that you can select the
proper viewing source and channel on your TV. Select the
VCR output channel (3 or 4) on your TV to view tapes or to
see programs selected by using the channel tuner in the
VCR.
During tape playback, we recommend
you use the AUDIO
and VIDEO output jacks on your VCR for improved per-
formance.
SWITCH
IN VCR
POSITION
TVNCR
switch may be
marked TVNIDEO
on somo VCRs.
VCR TUNER
SELECTS
CHANNELS TO
BE SEEN ON TV
CHAN 3/4
NO
J
YES
VIDEO TAPE
PROVIDES
PROGRAM TO
BE SEEN ON "IV
CHAN 3/4
MONAURAL
AUDIO
ONLY
MC)NAURAL
AUDIO
ONLY
r
VCR ANTENNA
OUTPUT TO "IV
VCRMOD_
12 - 3
Advertisement
Table of Contents
