Loading Bottom Rack - Whirlpool DU960PWKB1 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Adjustable
top rack (on some models)
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. One adjuster is located on each side of the top
rack.
To adjust the top rack
1. Hold the top rack with one hand near the adjuster.
Raise
Lower
2. With the other hand, turn the knob clockwise to raise a side
of the rack.
3. Turn the knob counterclockwise
to lower a side of the rack.
Repeat the steps for the remaining adjuster as needed. The 2
adjusters can be turned separately or together to raise or lower
the top rack. The top rack does not have to be level.
Adjustable
3-position
top rack (on some models)
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Two adjusters are located on each side of the top
rack. Each adjuster has 3 preset positions. The high and low
positions are marked on the adjuster.
To adjust the top rack
1. Hold the top rack with one hand near the adjuster.
0
The bottom rack is designed for plates, pans, casseroles, and
utensils. Items with cooked-on
or dried-on food should be loaded
with soiled surfaces facing inward to the spray. (See
recommended
loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
Mixed load
Do not load glasses, cups, or plastic items in the bottom
rack. Load small items in the bottom rack only if they are
secured in place.
Load plates, soup bowls, etc., between tines and facing
inward to the spray.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
2. With the other hand, pull out the top of the adjuster.
3. Raise or lower the rack to one of the preset positions.
4. Release the adjuster.
Repeat the steps for the remaining adjusters as needed. The 4
adjusters can be raised or lowered separately or together. The
top rack does not have to be level.
Utensil load
Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser and
silverware basket.
Secure heavily soiled cookware face down in the rack.
Make sure pot handles and other items do not stop rotation
of the spray arm(s). The spray arm(s) must move freely.
Do not load items between the bottom rack and the side of
the dishwasher tub because they might block the water inlet
opening.
NOTE: If you have removed the bottom rack for unloading or
cleaning, replace it with the bumpers in front.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents