Whirlpool LEC8858EQ1 Use & Care Manual page 16

CHANGING THE DRUM UGHT
The dryer light automatically turns on inside the
dryer drum when you open the door. Your dryer's
drum light may be one of two types, as shown.
Fire Hazard
Replace light bulb cover before
operating dryer,
Failure to do so can result in death
or fire,
To chan_e drum light t ype ,:
1. Unplug the dryer or disconnect the electricity
leading to the dryer at the main power supply.
2, Open the dryer door. Remove the light bulb
cover from the back
wall of the dryer by
turning the cover
clockwise.
3, Remove the light bulb by turning it
counterclockwise.
4, Replace the bulb with a 40-watt appliance
bulb only.
5, Replace the light bulb cover and lock in
place by turning
counterclockwise.
Tochan_e drum li_jht t ypez:
1.
Unplug the dryer or disconnect the electricity
leading to the dryer at the main power supply.
2, Open the dryer door. Remove the light bulb cover
from the back wall of the
dryer by removing the
screw located in the
lower right corner of
the cover.
3, Remove the light bulb by turning it
counterclockwise.
4. Replace the bulb with a 10-watt appliance
bulb only.
5, Replace the light bulb cover.
6, Reconnect power supply.
6, Reconnect power supply.
16