Download Print this page

Dryer - Whirlpool LEC8858EQ1 Use & Care Manual

Electric and gas dryers

Advertisement

CAmNG
FOR YOUR
DRYER
Proper care of your dryer can extend its life and help your dryer operate
efficiently.
CI£ANING
THE UNI' SCREEN
Every load
cleanin
The lint screen is located under a lid on top of the
dryer. Clean it before each load. A screen blocked
by lint can increase drying time.
To clean:
1. Open the lid and pull the lint screen towards you.
2, Roll lint off the screen with your fingers. Do not
rinse or wash screen to
remove lint. Wet lint is
hard to remove.
As needed c leaninq
3
Laundry detergents and fabric softeners can cause
a residue buildup on the lint screen. This buildup
can cause longer drying times for your clothes, or
cause the dryer to stop before your load is com-
pletely dry. You may be able to see this buildup,
or the lint may be falling off the screen because it
is clogged.
Clean the lint screen with a nylon brush every six
months or more frequently if it becomes clogged
due to a residue buildup,
Use the following method:
1.
Wet both sides of lint screen with hot water.
2. Wet a nylon brush with hot water and liquid
detergent; scrub lint
screen with the brush to
remove residue buildup.
3. Push the lint screen firmly back into place and
close the lid.
IMPORTANT:
• Do not run the dryer with the lint screen loose,
damaged, blocked, or missing. Doing so can
cause overheating and damage to both the dryer
and fabrics.
• Some towels made of synthetic fibers and natural
fibers (polyester and cotton blends) may shed
more lint than other towels, causing your dryer's
lint screen to fill up faster. Be sure to remove
lint from the lint screen before and after drying
new towels.
3. Rinse screen with hot water.
4. Thoroughly dry lint screen with a clean towel;
replace in dryer.
14

Hide quick links:

Advertisement

loading