Whirlpool Duet WFW9200SQ04 Use & Care Manual page 14

• Powdered detergents may not dissolve well in a slow-speed
cycle. For best results, use liquid detergent in slow-speed
cycles.
Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water
Temperature, and Spin Speed. The preset settings provide the
recommended fabric care for the selected cycle. See chart.
Cycle Soil Level Water Temp Spin
(cycle time) Speed
Sanitary Normal Super Hot/Cold High
(1:50)
Whitest Normal Hot/Cold High
Whites (1:15)
Heavy Normal Hot/Cold High
Duty (1:05)
Normal/ Normal Warm/Cold High
Casual (0:50)
Delicate Normal Warm/Cold Medium
(0:40)
Hand Normal Cold/Cold Low
Washables (0:30)
Clean N/A N/A High
Washer
Soak Normal Warm/Cold No Spin
(0:30)
Rinse/Spin N/A Cold/Cold High
(0:20)
Drain/Spin N/A N/A High
(0:11)
To change the preset cycle settings
Press the selector of each available setting until the desired
setting glows green.
Sanitary
Cycles certified by NSF International, an independent, third party
testing and certification organization are those with the sanitize
temperature selection available. The certification verified that
these cycles reduce 99.9% of bacteria typically found on clothing,
bedding, and towels. There is no carryover of bacteria between
loads after the cycle is complete.
Certified to Sanitize
Use this cycle to clean heavily soiled, colorfast fabrics. This cycle
combines a super hot water temperature and fast-speed tumbling
to help ensure the removal of heavy soils and stains. It is
recommended that you set your hot water heater to 120°F (49°C)
to ensure proper performance during this cycle. Extra high speed
spin helps shorten drying time. Only Sanitary cycle has been
designed to meet the requirements of NSF Protocol P172 for
Sanitizing Efficacy.
Whitest Whites
This cycle is especially designed for cleaning loads of soiled white
fabrics with the addition of bleach. Hot washing temperatures
assure optimal bleach activity. An additional rinse provides
optimal rinse performance to avoid chlorine residues on your
laundry. This cycle combines fast-speed tumbling, longer wash
time, and high speed spin to shorten drying time.
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics, and
heavily soiled garments. This cycle combines fast-speed
tumbling, longer wash time, and high speed spin to shorten drying
times. If the water temperature is lower than needed for this cycle,
the heater will warm the water to the optimum temperature.
Normal/Casual
Use this cycle to wash loads of no-iron fabrics, such as sport
shirts, blouses, casual business clothes, permanent press blends,
cottons and linens, and synthetic fabrics. This cycle combines
medium-speed tumbling, high-speed spin, and a load cooling
process to reduce wrinkling.
NOTE: For the best energy performance, use the Normal/Casual
Cycle.
Delicate
Use this cycle to clean hand washable and special-care garments.
Similar to the way garments are hand washed in a sink, the wash
action of this cycle combines periods of low speed tumbling and
soaking. CRADLE CLEAN
TM
motion offers gentle fabric care for
effective cleaning of delicate and hand washable garments.
Medium speed spin helps reduce wrinkling.
• Use mesh garment bags to wash undergarments such as
underwire bras, items with strings, and small items such as
infant socks.
Hand Washables
Use this cycle to clean hand washable and special-care garments.
Similar to the way garments are hand washed in a sink, the wash
action of this cycle combines periods of low speed tumbling and
soaking. CRADLE CLEAN
TM
motion offers gentle fabric care for
effective cleaning of delicate and hand washable garments. Low
speed spin helps reduce wrinkling.
Clean Washer
Use the Clean Washer cycle once a month to keep the inside of
your washer fresh and clean. This cycle uses a higher water level.
Use with AFFRESH
TM
washer cleaner tablet or liquid chlorine
bleach to thoroughly clean the inside of your washing machine.
This cycle should not be interrupted. See "Cleaning Your Washer"
in the "Washer Care" section.
IMPORTANT: Do not place garments or other items in the washer
during the Clean Washer cycle. Use this cycle with an empty wash
drum.
Soak
Use the Soak cycle to help remove small spots of set-in stains on
fabrics. This cycle provides a soak time with warm or cold water
followed by drain. Extra water, a short tumbling phase for equal
distribution of the laundry, and a soaking time without drum
movement improve the removal of set-in stains. Drain without spin
assures gentle treatment, even for delicate articles.
14