Installation Requirements; Tools And Parts; Options - Whirlpool Duet WFW9400VE03 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed
for connecting
the water inlet hoses
[]
Pliers (that open to 1%6" [39.5 ram])
[]
Flashlight (optional)
Tools needed
for installation
[]
Open end wrenches 17 mm and 13 mm
[]
Level
[]
Wood block
[]
Ruler or measuring tape
Parts supplied:
A
B
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
CC>
D. Transportbolt hole plug (4)
E. Beaded
strap
Alternate
Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the "Assistance
or Service" section.
if You Have
You Will Need to Buy
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
Overhead sewer
Standard 20 gal. (76 L), 30" (76.2 cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose
Part Number 8318155; and connector kit,
Part Number 285835
Drain hose too
4 ft (1.2 m) drain hose extension kit,
short
Part Number 285863
Water faucets
2 longer water fill hoses:
beyond reach of fill
6 ft (1.8 m) Part Number 76314,
hoses
10 ft (3.0 m) Part Number 350008
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (25.4 cm) or a
15.5" (39.4 cm) pedestal. These pedestals will add to the total
height of the washer for a total height of approximately
48" (121.9 cm) or 53.5" (135.9 cm), respectively.
A
B
A. 10" (25.4 cm)pedestal
B. 15.5" (39.4 cm) pedestal
To order, call the dealer from whom you purchased your washer
or refer to the "Assistance
or Service" section.
Pedestal
Color
Part Number
Height
10" (25.4 cm)
White
WHP1000SQ
10" (25.4 cm)
Black
WHP1000SB
10" (25.4 cm)
Diamond Dust (Silver)
WHP1000SU
15.5" (39.4 cm)
White
XHP1550VW
15.5" (39.4 cm)
Black
XHP1550VB
15.5" (39.4 cm)
Diamond Dust (Silver)
XHP1550VU
15.5" (39.4 cm)
New Aspen (Green)
XHP1550VA
15.5" (39.4 cm)
Tuscan Chestnut
XHP1550VC
15.5" (39.4 cm)
Ocean Sapphire
XHP1550VE
15.5" (39.4 cm)
Metallic Red
XHP1550VF
15.5" (39.4 cm)
Oxide
XHP1550VJ
15.5" (39.4 cm)
Emerald Green
XHP1550VP
15.5" (39.4 cm)
Burgundy
XHP1550VM
Stack
Kit
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section. Ask for Part
Number 8541503.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents