Oven Light; Troubleshooting - Whirlpool WFE361LVT0 User Instructions

SURFACE U NDER COOKTOP ( onsome models)
The coil c ooktop w ill l iftuptoprovide e asy access f orcleaning
beneath. Liftthecooktop b yboth front c orners u ntil t hesupport
locks intoplace.
Cleaning M ethod:
• Steel-wool pad
Toavoid damage totherange, donotremove thecooktop.
OVEN RACKS
Cleaning M ethod:
• Steel-wool pad
• For r acks thathave discolored andareharder toslide, a light
coating o fvegetable oilapplied t otherack guides w ill h elp
them slide.
STORAGE DRAWER
Check t hat s torage d rawer iscool a ndempty before c leaning.
Cleaning M ethod:
• Milddetergent
The oven light i sastandard 40-watt appliance bulb. B efore
replacing, make sure theoven and cooktop a recool a nd the
control knobs a reintheoffposition.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call.
www.whirlpool.com
Nothing will operate
• Is the power supply cord unplugged?
Plug into a grounded outlet.
Has a household fuse blown, or has a circuit breaker
tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
Cooktop will not operate
• Is the control knob set correctly?
Push in knob before turning to a setting.
• On ceramic glass models, is the oven control lockout set?
See the control lock keypad feature in the "Feature Guide"
section.
• Has a self-clean cycle been selected?
On some ceramic glass models, the cooktop will not operate
during a self-clean cycle.
Excessive heat around cookware on cooktop
• Is the cookware the proper size?
Use cookware about the same size as the surface cooking
area, element or surface burner. Cookware should not extend
more than 1/2"(1.3 cm) outside the cooking area.
Oven temperature too high or too low
• Does the oven temperature calibration need adjustment?
See "Oven Temperature Control" section of the "Electronic
Oven Controls" section.
Oven indicator lights flash
• Do the oven indicator lights flash?
See "Control Display" in the "Electronic Oven Controls"
section. If the indicator light(s) keeps flashing, call for service.
See cover for contact information.
Display shows messages
• Is the display showing a flashing time?
There has been a power failure. Clear the display. On some
models, reset the clock, if needed. See "Clock" keypad feature
in the "Feature Guide" section.
Is the display showing a letter followed by a number?
Depending on your model, press OFF/CANCEL or CANCEL/
OFF to clear the display. See "Control Display" in the
"Electronic Oven Controls" section. If it reappears, call for
service. See cover for contact information.
Is the display showing a flashing "PUSH?" or "PSH"?
See the "Start" keypad feature in the "Feature Guide" section.
Cooktop cooking results not what expected
• Is the control knob set to the proper heat level?
See "Cooktop Use" section.
• Is the range level?
Level the range. See the Installation Instructions.
Oven will not operate
• Is the electronic oven control set correctly?
See "Electronic Oven Controls" section.
Has a delay start been set?
See "Timed Cooking" section.
On some models, is the oven control lockout set?
See the control lock keypad feature in the "Feature Guide"
section.
Self-Cleaning cycle will not operate
• Is the oven door open?
Close the oven door all the way.
• Has the function been entered?
See "Self-Cleaning Cycle" section.
• Has a delay start been set?
See "Timed Cooking" section.
Oven cooking results not what expected
• Is the range level?
Level the range. See the Installation Instructions.
• Is the proper temperature set?
Double-check the recipe in a reliable cookbook.
10