FujiFilm X20 Owner's Manual page 69

h: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will
be displayed; frame a white object so that it fills the LCD monitor and press the shutter button all the way down
to measure white balance (to select the most recent custom value and exit without measuring white balance,
press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog).
• If "COMPLETED!" is displayed, press MENU/OK to set white balance to the measured value.
• If "UNDER" is displayed, raise exposure compensation (P 49) and try again.
• If "OVER" is displayed, lower exposure compensation and try again.
1
For greater precision, adjust P FILM SIMULATION, N ISO, and U DYNAMIC RANGE before measuring
white balance.
1
• White balance is adjusted for flash lighting only in AUTO and g modes. Turn the flash off using other white bal-
ance options.
• Results vary with shooting conditions. Play pictures back after shooting to check colors in the LCD monitor.
White Balance
55