To Create An Iscsi Device - Freecom SILVER STORE 2-DRIVE NAS User Manual
Network attached hard drive / 3.5" / raid / gigabit lan / usb 3.0 host
Hide thumbs
Also See for SILVER STORE 2-DRIVE NAS:
- Features (3 pages) ,
- Quick install manual (8 pages)
Table of Contents
Advertisement
FREECOM SILVER STORE 2-DRIVE NAS
EN
To create an iSCSI device:
NOTE: Before you start to create an iSCSI device, make sure you have enabled
the iSCSI service. See previous section for detailed instructions.
1. Click the iSCSI tab.
2. Click the iSCSI Device subtab.
3. Click the Add icon located on the lower left corner of the Storage page.
4. In the Device Name box, enter a name for the device.
5. In the Size box, enter the amount of storage space to allocate for this device.
6. In the Location box, select the volume in which the device will reside.
7. Click Submit.
44
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SILVER STORE 2-DRIVE NAS and is the answer not in the manual?
Questions and answers