EN
EN
3. In the Mail Server box, enter the SMTP server name or an IP address to be used for
sending email.
4. In the SMTP port box, enter the SMTP port number for outgoing mail.
5. If TLS/SSL is required on email clients, select the Enable check box.
6. If SMTP authentication is required, click the Enable check box, then enter the user name
and password.
7. In the Email Recipients box, enter the email address for the notification recipient. Up
to five email addresses can be added at a time.
8. Click Send Test Mail to send a test alert and confirm your settings are correct.
9. Click Submit.
Log Event
Use the Log Event tab to get an overview of all events that were logged by the system.
In the lower left corner, you have the options to delete all log files older than 7 days, to
delete all log files and to refresh the view.
Shut Down/Reboot
Use the Shut Down/Reboot tab to remotely shut down or reboot the SilverStore.
FREECOM SILVER STORE 2-DRIVE NAS
26
Need help?
Do you have a question about the SILVER STORE 2-DRIVE NAS and is the answer not in the manual?
Questions and answers