Advanced Setup; To Restore Silverstore To Factory Settings; To Enable File System Check On Reboot - Freecom SILVER STORE 2-DRIVE NAS User Manual

FREECOM SILVER STORE 2-DRIVE NAS
EN

To restore SilverStore to factory settings:

IMPORTANT: Create a backup file of your current system configuration before
restoring the system to its factory default settings. If you have made several
changes to the system configuration file (i.e. adding multiple users) you can easily
restore to the old system configuration file. When you restore to factory settings,
all system settings such as the IP address, device name, admin user name and
password, RAID configuration information, media files will be erased.
1. Click the System Configuration Backup/Restore tab.
2. In the Restore Default Configuration section, click Restore.

Advanced Setup

Use the Advanced Setup tab to enable the file system checking features, turn on scanning
device for bad blocks and enable hard disk standby mode.

To enable file system check on reboot:

1. Click the Advanced Setup tab.
2. Click the Advanced HDD Setup subtab.
3. Click the Perform Filesystem Check at Next Boot Up check box.
4. Click Submit.
30