Serial ATA RAID Quick User's Guide
Raid Recovery Operation
The recovering operation is workable only when error RAID1
NOTE:
set or error RAID 0+1 set (must at least an error RAID0 set)
exist.
a) First, you can click the button "Available Raid" to find whether any error
Raid set existing. See below:
Next, highlight the error Raid set you want to recovery. And you can click
the button "Ok" to continue or click "Cancel" to cancel this operation.
b) After "Available RAID" selected, click the button "Available Disk" to find
whether any empty hard disk existing. See below:
Next, highlight the empty hard disk you want to select. And you can click
the button "Ok" to continue or click "Cancel" to give up this selection.
55