Serial ATA RAID Quick User's Guide
5) Click the tab "configuration", you can find three tabs: Create Raid,
Delete Raid and Raid Recovery. In the same way, you can switch to
different tabs by clicking on it.
About Create Raid
Click the tab "Create Raid", you can find three drop-down box and three
panes. Those meaning will be showing below.
Viewing the "Create Raid"
a)
Raid Type: Click the drop-down box "Raid Type". This box enables
the user to select array type. There are four array types that the user
can select: JBOD, RAID 0 (Stripe), RAID 1 (Mirror) and RAID 0+1 (St -
Mr). User can select any one array type to create a RAID set. When
the number of hard drivers is not equal to 4, the selection "RAID 0+1"
will disappear.
36