Stopping/Restarting Your Washer; Selecting A Cycle And Time - Whirlpool LSL9244EQ0 Use And Care Manual

9. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you
want. See the following pages.
10. Pull out the Cycle Control Knob to
start the washer.

Stopping/restarting your washer

•
To stop the washer at any time, push in
the Cycle Control Knob.
•
To restart the washer, close the lid
(if necessary) and pull out the Cycle
Control Knob.

Selecting a cycle and time

This section illustrates and describes the
wash cycles you can select with the Cycle
Control Knob. Use this information to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
•
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
O PERATIN G YO UR WASHER
•
Refer to page 9 to learn more about the
sounds you may hear during a wash cycle.
•
Refer to page 10 to help you understand
what happens during a wash cycle.
continued on next page
7