Leveling - Fluke 414D User Manual


5. Push at the top target. Height Tracking stops
and the display shows the vertical distance between
the two measured targets. See Figure 12 for more
information.
The minimum/maximum tracking is very helpful
for 90 angle measurements. See page 17 for
more information.
12
X
Note
h3
h2
h1
gwo10.eps

Leveling

The Leveling function continuously shows the angle of the
Meter. From an angle of 5 , the Meter starts to beep. As
it gets near 1 , the Meter beeps faster. At 0.3 , the
Meter beeps constantly.
To level:

1. Push
2. Put the Meter on object to do a test for level.
The angle continuously shows on the display as the
object moves.
Y
Laser Distance Meter

3x = Leveling. shows in the display.
Measurements
21