Control Panel Glass; Oven Light - Whirlpool GY396LXGB3 Use & Care Manual

Self-cleaning electric ranges
Hide thumbs Also See for GY396LXGB3:
Table of Contents

Advertisement

Available languages

Available languages

Heavy soil, dark streaks, specks and discoloration
Cooktop Polishing Creme or nonabrasive
cleanser:
Rub product into soil with a damp paper towel or soft cloth.
Continue rubbing until white film disappears.
Burned-on soil
Cooktop Polishing Creme and Cooktop Scraper:
Rub creme into soil with damp paper towel. Hold scraper as
flat as possible on surface and scrape. Repeat for stubborn
spots. Polish entire cooktop with creme and paper towel.
Metal marks from aluminum and copper
Cooktop Polishing Creme:
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears.
The marks will not totally
disappear but after many cleanings become less noticeable.
Tiny scratches and abrasions
Cooktop Polishing Creme:
Rub creme into surface with a damp paper towel or soft
cloth. Continue rubbing until white film disappears. Scratches
and abrasions do not affect cooking performance
and after
many cleanings become less noticeable.
COOKTOP
CONTROLS
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs.
When replacing knobs, make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
Soap and water or dishwasher:
Pull knobs straight away from control panel to remove.
CONTROL
PAN EL
Do not use abrasive cleaners, steel-wool pads, gritty washcloths
or some paper towels. Damage may occur.
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly
on panel.
OVEN DOOR EXTERIOR
Glass cleaner and paper towels or nonabrasive plastic
scrubbing pad:
Apply glass cleaner to soft cloth or sponge, not directly
on panel.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures,
foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Self-Cleaning cycle:
See "Self-Cleaning
Cycle" first.
OVEN AND ROASTING
RACKS
Self-Cleaning cycle:
See "Self-Cleaning
Cycle" first. Remove racks or they will
discolor and become harder to slide. If this happens, a light
coating of vegetable oil applied to the rack guides will help
them slide.
Steel-wool
pad
BROILER
PAN AND GRID
Do not clean in the Self-Cleaning
cycle.
Mildly abrasive cleanser:
Scrub with wet scouring pad.
Solution of 1/2cup (125 mL) ammonia to 1 gal. (3.75 L) water:
Soak for 20 minutes, then scrub with scouring or steel-wool
pad.
Oven cleaner:
Follow product label instructions.
Porcelain enamel only, not chrome
Dishwasher
STORAGE
DRAWER
( on some models)
Make sure drawer is cool and empty before cleaning.
For more information, see "Storage Drawer" section.
Mild detergent
Drawer Liner (on some models)
Remove all stored items from drawer and lift out drawer liner.
Clean with mild detergent.
;i
The control panel glass can be removed for easier cleaning,
Do not clean the electronics
behind the glass because damage
can occur.
To Remove:
1. Remove control knobs by pulling straight out.
2. Release clips.
3. Remove glass by pulling slightly up and forward.
The oven light is a standard 40-watt appliance bulb. It will come
on when the oven door is open. It will not work during the Self-
Cleaning cycle. On some models, when the oven door is closed,
press OVEN LIGHT to turn it on or off.
Before replacing, make sure the oven and cooktop are cool and
the control knobs are off.
To replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise
to remove.
3. Turn bulb counterclockwise
to remove from socket.
4. Replace bulb and bulb cover by turning clockwise.
5. Plug in range or reconnect power.
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents