Advertisement
Quick Links
Fantasea EyeGrabber Canon G Series
The EyeGrabber Canon G Series allows for secure storage of Fantasea accessory lenses and filters when not installed
on the housing.
Compatible with the Following Lens Accessories:
BigEye Lens G Series (Cat. No. 5135)
BigEye Lens S90/S95 (Cat. No. 5139)
EyeDaptor G Series-F67 (Cat. No. 4701) - with any lens accessory mounted on top of the adaptor
EyeDaptor S90/S95-F67 (Cat. No. 4710) - with any lens accessory mounted on top of the adaptor
RedEye Filter G Series (Cat. No. 5201)
PinkEye Filter G Series (Cat. No. 5303)
RedEye Filter S90/S95 (Cat. No. 5305)
PinkEye Filter S90/S95 (Cat. No. 5307)
SharpEye Lens M67 (Cat. No. 5128) - only when mounted on top of the EyeDaptor G Series-F67 (Cat. No.
4701) or the EyeDaptor S90/S95-F67 (Cat. No. 4710)
Using the EyeDaptor G9-G10 (Cat. No. 4703) or the EyeDaptor S90/S95-G Series (Cat. No. 4707) with any of
the lens accessories mentioned above, still allows mounting these lens accessories on the EyeGrabber
Any of the lens accessories mentioned above can still be mounted on the EyeGrabber when color correction
inserts are installed inside
Please note that this EyeGrabber is not compatible with the RedEye Filter G7/G9 (Cat. No. 5203)
Included in the Kit:
EyeGrabber Canon G Series
Instructions for Use:
1. Assembling the EyeGrabber Lens Holder on a Flex or Ball & Joint Arm
a. Please use the utmost care and do not use excessive force when assembling and disassembling the different
accessories, in order to not cause any damage to the products.
b. It is advisable to mount the EyeGrabber on the arm prior to installing the arm on the housing tray or handle.
c. Remove the screws from the T2 Connector so that the two parts of the T2 Connector are disconnected. Please
note that there are two sets of screws included in the kit. The type of screws compatible with your arm
depends on the model of the arm. In general, longer screws are compatible with wider arms, such as Fantasea
1
(Cat. No. 4054)
Instruction Manual
T2 Connector
EyeGrabber Canon G Series Instruction Manual 20110615
Set of 2 shorter screws
Advertisement
Related Manuals for Fantasea BigEye G Series
Summary of Contents for Fantasea BigEye G Series
- Page 1 The type of screws compatible with your arm depends on the model of the arm. In general, longer screws are compatible with wider arms, such as Fantasea EyeGrabber Canon G Series Instruction Manual 20110615...
- Page 2 Flex arms, while shorter screws are compatible with narrower arms, such as Ball & Joint arms. Choose the proper set of screws for your system and leave the screws installed only inside the front part of the T2 Connector (image #1). Keep the other set of screws in storage for future use, in case you replace the arms used in your system.
- Page 3 g. Hold the lens holder against one of the sides of the T2 Connector attached to the arm, so that the lens holder is facing out of the arm and the lens holder’s connector is aligned with the T2 Connector. Make sure that you attach the lens holder on the T2 Connector that faces outward from the housing, so you will have more space to mount the lens on the EyeGrabber.
- Page 4 Fantasea product, including cameras and lenses, and resulting from any defect in the product materials or workmanship. 5. The cost of sending the product back to Fantasea or its authorized service facilities is the responsibility of the customer. 6. The warranty does not cover any incidental damages resulting from any defects in the product.