Page 2
1. Introduction The Fantasea BigEye Lens M46 is a patented “wet” accessory wide angle lens that fits onto the housing 46mm lens port thread and can be installed and removed during the course of the dive. It is perfect for photographing...
Page 3
3. Included in Packaging BigEye Lens - M46 Hard Lens Cover Lens and hard lens cover secure lines Warranty Instruction Manual 4. Specifications Features a 46mm thread mount Depth rated to 50 meters / 180 feet ...
Page 4
C. During the dive, install the BigEye Lens by screwing it on to your housing lens port, as shown on the figures below. Important Notice: The BigEye Lens should only be screwed till the point of minimal resistance. Continuing to screw the lens further than this point will make it difficult to remove it later on.
Page 5
“Macro”. H. When removing the BigEye Lens from the housing, it can be conveniently stored by attaching it to the EyeGrabber F46, which mounts on Fantasea Flex Arms, thereby making it easily available for future use. For further information, please visit our website at www.fantasea.com/FantaseaEyes...
Page 6
a. Make sure that the wings of the BigEye Lens are positioned at an angle that blocks the strobe output, as well as the sun. In order to prevent the wings from unintentionally changing position, some friction has been added, but rotating them can be easily done by following a simple technique.
Page 7
E. When storing the lens and during transportation, make sure that it is properly protected in order to prevent scratches, cracks or any other damage to the lens. F. After Dive Care: Detach the BigEye Lens from the housing lens port and rinse all lens components in fresh water.
Page 8
For further information, please contact us at www.fantasea.com/contact or visit our website www.fantasea.com...
Need help?
Do you have a question about the BigEye Lens M46 and is the answer not in the manual?
Questions and answers