Assembly; Use - Kenmore Power-Mate KC50XBZRZU01 Owner's Manual

Electrical Shock Hazard
DO NOT plug into electrical supply
until assembly is complete. Failure
to do so could result in electrical
shock or injury,
i i ill l
1. Insert wand(s)into Power-Mate®untilthe
wand buttonssnap intoplace.
To remove:
Step on
wandquick
release
pedal, then
pull up on
wands.
_,_/ Wand
Quick
Relealse
/ Pile Height
Pile Height "_
Pedal
1. Lowerwandfrom upright position by
pressing on the handle release pedal.
CAUTION
DO NOT leave the Power-Mate®
running in one spot in the upright
position for any length of time.
Damage to carpet may occur.
i i ==ll=,=,=,=l=,
2, Select a pile height setting by pressing the
small pedal on the rear of the Power-Mate®.
The pile height setting shows on the indica-
tor. See SUGGESTED PILE HEIGHT SET-
TINGS.
Attention: Refer to your carpet manufactur-
ers cleaning recommendations. Some more
delicate carpets may require that they be
vacuumed with the Power-Mate® agitator
turned off to prevent carpet damage.