Advertisement
Available languages
Available languages
4. Place a shallow panunder thewater
supply valve.Then,usea wrench to
disconnect thewaterinletfromthe
watersupply valve.Separate t hewater
inletfromthewatersupply valveand
drainwaterintothepan.
5. Remove thespring clamp fromthe
wateroutletandseparate fromthe
watersupply valve; d rainwaterinto
pan.
6. Reconnect bothwaterinletandwater
outlet t othewatersupply valve.
7. Empty thepanandreposition i t under
thewaterpump.
8. Remove theclamp anddisconnect the
drainhosefromthewaterpump; d rain
waterintopan.
9. Reconnect drainhoseto thewater
pump, b eingsureto position the clamp
overtheconnection.
10. Replace the lower accesspanel.
NOTE: I f yourdishwasher is connected t o
a garbage disposal, do notrunwaterinto
thesinkafterwinterizing. Thiscouldcause
waterto refillthedrainhoseonyour
dishwasher.
Reconnecting
your
dishwasher
1. Remove the 4 screws on the lower
access panel and remove lower
access panel.
2. Turn on the water supply to dishwasher.
3. Reconnect power or plug in dishwasher.
4. Run dishwasher through a complete
cycle and check for leaks.
5. Replace lower access panel.
Built-in
models
k
Water
outlet
Spring
Water pump
clamp
and motor
i
Portable
models
Water
outlet
!i
Spring
Screw
Water pump
clamp
clamp
and motor
•
....
S
Water
supply
Water
inset
valve
Drain
hose
27
Advertisement
