– cutting system runs forward Stop cutting head stops – shredder remains ready for operation Reversing cutting system runs in reverse Fellowes Manufacturing Co. 1789 Norwood Avenue Itasca, IL 60143 USA Model: Serial #: Voltage: Motor:...
(Depending on country) Dimensions (H x W x D) Weight Waste container volume Noise level Paper DIN 19307 SM 4a – 70 Edition 01/03 Paper shredder Model 520 Strip cut 5/32" 1/4" (3.9 mm) (5.8 mm) 38-40 32 FPM (143 mm/s) 16"(400 mm)
Switching equipment on – Set main power switch (located on back of shredder) to ON (1) position. – (On the 520 HS, the security key lock switch must also be turned on) Green LED lights • Equipment is ready for operation (standby) To shred paper –...
– When shredding capacity drops or the noise increases. • Apply oil over full width of cutting cylinders through the paper entry (Fellowes Powershred Lubricant # 35250). CAUTION: Do not use flammable synthetic oil, petroleum-based products, or aerosol lubricants of any kind.
20 years from the date of purchase by the original consumer in the case of models 320, 320C, 380, 380C, 420, 420C, 520 and 520C or 5 years from the date of purchase by the original purchaser in the case of models 320HS, 420HS and 480HS.
Need help?
Do you have a question about the POWERSHRED 520 and is the answer not in the manual?
Questions and answers