Important Safety Instructions; Parts Identification - Fellowes POWERSHRED 520 Operating Instructions Manual

520
520C

1. Important Safety Instructions

1. Read all instructions before use.
2. Save these instructions for later use.
3. Follow all warnings and instructions marked on
the product.
4. Unplug this product from the wall outlet before
cleaning. Clean with a damp cloth using a mild
soap and water solution. (Do not use abrasives
or petroleum based cleaners.)
5. Place this product as close as possible to
power source for quick and easy unplugging.
6. Do not use this product near water.
7. This product should never be placed near or
over a radiator or heat source.
8. Operate from the type power source indicated
on the marking label. If you are not sure of the
type of power available, consult your dealer or
local electricity board.
9. Do not allow anything to rest on the power
cord. Do not place this product where people
may walk on the cord.
10. If an extension cord is used with this product,
make sure that the total of the ampere ratings
on the products plugged into the extension cord
do not exceed the extension cord ampere
rating.
11. Do not attempt to service this product yourself,
as opening or removing covers may expose
you to dangerous live parts or other risks.
12. Unplug this product and refer servicing to
qualified personnel under the following
conditions:
A) When the power cord or plug is damaged or
frayed.
B) If liquid has been spilled on the product.
C) If the product has been exposed to rain.
D) If the product does not operate normally when
the operating instructions are followed.
E) If the product has been dropped or the casing
has been damaged.
13. Keep out of the reach of children.
14. This shredder should be operated only with an
operator in attendance.
15. Do not use flammable synthetic oil, petroleum-
based products, or aerosols of any kind on or
near shredder at any time.
4
Paper shredder

2. Parts Identification

10
9
8
520
520C
1. Membrane keyboard
2. Security key lock
(520HS only)
3. Cover
4. Main power switch
5. Serial Label
Ready for operation
green LED
Cut material bag full
red LED
Paper jam – electric motor
overloaded
red LED
Front door not closed
red LED
On
shredder is switched on – cutting system
runs forward
Stop
cutting head stops – shredder remains
ready for operation
Reversing
cutting system runs in reverse
2
1 3
4
5
Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143 USA
Model:
Serial #:
Voltage: Motor:
Current: Manufactured:
R
R
6
7
6. Caution label
7. Cabinet
8. Cabinet access door
9. Paper feed opening
10. Paper guide roller
Edition 01/03