Case Study: Deploying A Summit X250E-48T Switch With Extreme Networks; Auto Configuration Feature Enabled - Extreme Networks Auto Configuration Configuration

Simplify and reduce costs for deploying switches in the network
Hide thumbs Also See for Auto Configuration:
Table of Contents

Advertisement

Case Study: Deploying a Summit X250e-48t switch with Extreme Networks

Auto Configuration Feature Enabled

In this section, we will observe the switch behavior when deployed in the network. The case study uses the DHCP configuration
for devices which fall under the class "PRIMECORP-Edge-without-POE." Please refer to the class description in the case study
for using DHCP server in linux distributions.
1. When a console connection to the switch exists, the following information will be logged on the console. Notice that the
switch has detected the auto-provision configuration and warns the user about configuration changes.
Loading EXOS Image ...
Running Image ...
Starting ExtremeXOS 12.5.0b10
Copyright (C) 1996-2010 Extreme Networks.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,957; 6,859,438;
6,912,592; 6,954,436; 6,977,891; 6,980,550; 6,981,174; 7,003,705; 7,017,082; 7,046,665;
7,126,923; 7,142,509; 7,149,217; 7,152,124; 7,154,861; 7,245,619; 7,245,629; 7,269,135.
(pending-AAA) login:
Authentication Service (AAA) on the master node is now available for login.
admin
password:
ExtremeXOS
Copyright (C) 2000-2010 Extreme Networks. All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,957; 6,859,438;
6,912,592; 6,954,436; 6,977,891; 6,980,550; 6,981,174; 7,003,705; 7,017,082; 7,046,665;
7,126,923; 7,142,509; 7,149,217; 7,152,124; 7,154,861; 7,245,619; 7,245,629; 7,269,135.
==============================================================================
Press the <tab> or '?' key at any time for completions.
Remember to save your configuration changes.
This switch currently has all management methods enabled for convenience reasons.
Please answer these questions about the security settings you would like to use.
Telnet is enabled by default. Telnet is unencrypted and has been the target of
security exploits in the past.
© 2010 Extreme Networks, Inc. All rights reserved.
All rights reserved.
Extreme Networks Application Note
Extreme Networks Auto Configuration—Page 15

Advertisement

Table of Contents
loading

Table of Contents