Cleaning And Maintenance - Viking DFRB364L Use & Care Manual

Cleaning & Maintenance
Your unit is built to give you many years of dependable service.
However, there are a few things you can do to help extend its product
life. This section tells you how to clean your unit and what to do when
going on vacation, moving, or during a power outage.
Interior Surfaces
Wash surfaces with 4 tablespoons baking soda dissolved in 1 quart
warm water and a soft, clean cloth. Rinse surfaces with warm water.
Dry with a soft clean cloth.
Do not use the following to clean interior surfaces:
*abrasive or harsh cleaners, ammonia, chlorine bleach
*concentrated detergents or solvents
*metal scouring pads
These items can scratch, crack and discolor surfaces.
Do not place ice bins or shelves in dishwasher.
Glass Shelves
Remove shelf by lifting front, releasing hooks from metal track then
pulling out. Place shelf on a towel. Allow shelf to adjust to room
temperature before cleaning.
To clean crevices:
1. Dilute mild detergent and brush solution into crevices using a
plastic bristle brush. Let set for 5 minutes.
2. Spray warm water into crevices using faucet spray attachment.
3. Dry shelf thoroughly and replace shelf by inserting hooks into metal
track and lowering front.
Cleaning Chart
Part What to Use How to Clean
Removable parts Sponge or cloth with mild Hand wash,
_,shelves, drawers) detergent and warm water, rinse, and
dry thoroughly.
Front Door panels
• Stainless steel Stainless steel cleaner
Wipe with soft
cloth.
.Painted
Sponge or cloth with mild
detergent and warm water.
Hand wash,
rinse, and
dry thoroughly
Interior walls
',allow freezer to
warm up so cloth
will not stick)
Sponge, soft cloth or paper
towel with baking soda or
or mild detergent and
warm water.
Hand wash,
rinse, and
dry thoroughly.
Door liners and
askets
Sponge, soft cloth or paper
towel with mild detergent
and warm water. Do not
use cleaning waxes,
concentrated detergents,
or cleaners containing
chlorine bleach.
Wash, wipe
and dry
thoroughly.
Plastic parts
_,covers, panels)
Soft, clean sponge or soft
clean cloth with mild
detergent and warm water
Do not use paper towels,
window sprays, or scouring
pads. These can scratch
and damage the finish.
Wash, wipe
and dry
thoroughly.
Condenser Coil Vacuum cleaner with
extended narrow
attachment
Vacuum coils
when dusty or
dirty.
20 21