Locking Channels - Toshiba 14AF46C Owner's Manual

4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the LOCK menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
PCTURE AUDO SETUP 1,1_i1_1_1
VIDEO LOCK OFF
GAME TIMER OFF
NEW PINCODE START •
SELECT &Y ADJUST • I_
5. You may now enable blocking. See "Locking channels" (below),
"To change your PIN code" (below), "Locking video input" (page
17), or "Setting the GameTimer TM"(page 17).
To change your PIN code:
1. Press MENU, then press { or _, to display the OPTION menu.
2. Press A or v to highlight LOCK.
3. Press { or _"to display the BLOCKING menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press A or v to highlight NEW PIN CODE and press { or ]_ to
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0-9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.
Note:
If you forget your PIN code, press RECALL
four times within five seconds from the
BLOCKING menu. The PIN code will be
released (BLOCKING RESET status
restored).
Channel
Numbers
-- Recall
--Av {_.
-- Exit
Menu/
Enter
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
To lock channels:
1. Use the Channel Number buttons (0-9, 100) to display the
television channel you wish to lock.
2. Press MENU, then press { or _" to display the OPTION menu.
3. Press A or v to highlight LOCK.
4. Press { or _" to display the LOCK menu.
5. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu
appears.
6. Press A or v to highlight CH LOCK
and press { or _" to display the CH
LOCK menu.
7. Press { or _" to select the following:
• SET- to set the channel as one to be
locked. Then press ENTER.
• CLEAR- to clear all channels from
the list of locked channels.
Then press ENTER.
8. Repeat steps 1 through 7 to lock other
channels. When you are finished
locking channels, press EXIT to return
to normal viewing.
If you try to tune a locked channel, the
TV will not display it, but will display the
nearest unlocked channel.
I
VIDEO LOCK OFF
GAMETIMER OFF
NEW PIN CODE START
SELECT • • ADJUST <
_ii_CLEAR
LOCKED CH 0 0 0
0 0 0
TV CABLE 0 0 0
SELECT _ _ SET ENTER
END EXIT
Channel
Numbers
Av
,(),
Exit
Menu/
Enter
Note:
After programming CH LOCK, change
channels before turning off the television.
16