Adding Ci_Aimels To The Tv's Memory; Programmdlg Cbaimels Automatically - Toshiba 46H84 Owner's Manual

Addin 9 channels to the
TV's memory
Wl_en you press Ci_annel A or V, your TV will stop only on the
c!_annels stored in the TV's channel memory.
Follow the steps below and on the next page to program all active
c!_annels into the TV's memor>
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in its memor> After the channels are stored automaticall>
you can manually add or erase individual ciaannels (see page 25).
To program channels automatically:
1. Press MENU, and then press @ or _ until the SET UP menu
appears.
2. Press A or Y m_ril the TV/CABLE is highlighted, and then press
ENTER to display the pull-down snenu.
3. Press A or V to highlight either TV or CABLE, depending on
which you use. If you use an antenna, higialight TV; if you use
cable, higiflight (;ABLE.
-_ET UP V
_JH pR_:)GRAM
ADD, ERASE
@ : MOV E _T : 9 E •
Notre:
_ lune the 77/to _, channel nU progl_,mmed
in the channe/ memory, you must use the
Channe/ Numbd buttmTs on the remote
COtTtf_J_
A_
4. Press_to select CHPROGRAM.
SET UP
LA N G I I AG E ENG:gI_$
CLOCK t-;ET U _r_
ANT T • 2 _ _'"'"'"'"'"'"'
TV i (;ABLE _i_ _ _:B_E_ _:__i
i
@:MOVE gliTl_ :START
5. Press ENTER to start claannel programming. The TV will
automatically cycle tiarougia all the TV or Cable channels
(depending on wiaicia you selected), and store all active ciaannels
in the channel memor>
While the TV is cycling througia the channels, the message
"Programming Now--Please _fit" appears.
6. When channel programming is complete,the message
<<Completed" appears.
7. Press Channel _ or _ to view the programmed channels.