Download Print this page

Connection To The Power Supply; Connecting The Water; Switching On The Appliance; Switching Off And Disconnecting The Appliance - Thermador T181F Series Use & Care Manual

Built-in freezers

Advertisement

Available languages

Available languages

Connection
to the power
supply
Avoid
Electrical
Shock
Hazard
Plug into a grounded
3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions
can result in death, fire, or
electrical
shock.
Improper
connection
of the
equipment
grounding
conductor
may result in electric shock.
Have the appliance
checked
by
a qualified electrician
or service
technician
if you are in doubt as
to whether the appliance
has
been properly
grounded.
The appliance
comes with an UL
listed, 3 wire power supply cord.
The appliance
requires a 3 wire
receptacle.
The receptacle
must be installed by
a licensed electrician
only.
Connecting
the
water
A cold water connection
is required
for operation
of the automatic
ice
maker. The water pressure must be
between
25 and 120 p.s.i.
(1.72 8.25 bar).
The installation
must comply
with
local plumbing
regulations
and local
and state taws.
A separate shut-off valve must be
installed for the appliance
water
connection.
The shut off valve for the water
connection
must not be behind the
appliance.
It is recommended
to
place the shut-off valve directly next
to the appliance
(base unit) or in
another easily accessible
location.
Switching
on
the appliance
C3 Press the POWER button.
When the appliance
has been
switched
on, the appliance
begins to
coot down. When the doors are
open, the interior lights come on.
The preset temperatures
(factory
settings) are reached after some
hours. Do not put any food in
the appliance
beforehand.
Do not use the first ice cubes
from the ice maker! Discard the
ice production
of the first
24 hours after switching
on the
icemaker.
To change the preset temperatures
> see "Setting the temperature".
Switching
off
and
disconnecting
the appliance
Switching
off the
appliance
C3 Pressthe
POWER button.
If switching
off the appliance
for
a period longer than 2 weeks,
remove the water filter. Before
switching
on the appliance
again, install a new filter
(see "Exchanging
the filter").
Disconnecting
the
appliance
If you do not use the appliance
for a
prolonged
period:
C3 Shut off the water supply line.
C3 Shut off the water supply line
several hours before switching
off the appliance.
C3 Remove and discard the water
filter. Secure the filter cap!
C3 Take all food out of the
appliance.
C3 Putt out the mains plug or switch
off the fuse.
C3 Empty the ice cube container.
C3 Clean the appliance
interior (see
"Cleaning the appliance").
C3 To prevent odors, leave the
doors open.
8

Hide quick links:

Advertisement

loading