Frigidaire TEF361ESC Use & Care Manual page 9

READ THE INSTRUCTIONS CAREFU L LYBEFORE U SING THE OVEN. Forsatisfactory useofyouroven, b ecome f amiliarwith
thevarious padfunctions o ftheovenasdescribed b elow.
BROIL PAD-- Used to
select the variable broil
function.
UP and DOWN ARROW PADS-- Used along
with the function pads to select oven
temperature, time of day, clean time and minute
FEATURE INDICATOR LIGHTS--
These light to show which feature
BAKE PAD--Used
to select the bake
function.
PAD-- Used to set or
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ONIOFF pad is
used to set the
Continuous Bake
feature.
SELF-CLEAN PAD--
Used to select the
Self-Cleaning cycle. A
2 or 3 hour Self-Clean
time may be selected.
• • • Oven
• rehe t
• Door Locked
_ Controls
• , , Self-Cleaning Oven . , .
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
CLEAR/OFF PAD-- Used
to clear any function
previously entered
except the time of day
and minute timer. Press
CLEAR/OFF to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven door
lockout setting.
*Note; The OVEN indicator light onthe electronic display Will turn ON and OFF When using the Bake featur e and during
preheat, This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press _. " "appears in the display.
2. Press and hold the A until "HI" appears in the display.
3. Press and hold _ until °F or °C appears in the display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.