Sony CDP-297 Operating Instructions Manual page 20

m
2-A-
[c:] (:_ c
z=u__
3
m
(Only for CDP-397)
5
I j]l,
1,
2-B2) 2-B1)
Program selections for side B by repeating step
2-A or 2-B.
Start recording on the cassette deck and press
the I_II (I_) button.
Be sure to start recording on the cassette deck first to
transport the leader tape before pressing the I_11 (1_)
button on this unit.
To make a program only for one side of a tape
Skip steps 3 and 4 in the prior procedure.
To check the remaining time
Press the TIME button once to see the remaining time of the
selection being played; twice to see the total remaining time;
once more to return to the initial display.
If you have inserted a pause, the display shows the
remaining time until the pause.
What isthe tapeindicato_
During program play,thetapeindicator shows youwhichsideoftheprogram is being
played.
^_'_-"J : Program A is being played.
_[_e : Program A hasbeenplayedandtheunitis inpausemode, o rprogram B
isbeing played.
To play the selections for side B
When the selections for side A are played, the unit enters
pause mode. Reverse the tape, then press the I_11 (1_or II)
button.
To check your program
See page 13.
To change your program
See page 13.
2O