Sony Handycam HDR-CX350 Operating Manual page 52

@ Touch _ ---* [YES] on the camcorder
screen,
• To create another disc of the same
contents, insert a new disc and touch
[CREATE SAME DISC].
@ After the operation is completed, touch
[EXIT] --* [END] on the camcorder
screen.
@ Disconnect the USB cable from your
camcorden
O Notes
• Do not do any of the fbllowing when creating
a disc.
- Turn off the camcorder
- Disconnect the USB cable or the AC adaptor
- Subject the camcorder to mechanical shock
or vibration
- Eject the memory card lrom the camcorder
• Play the created disc to make sure dubbing was
peribrmed correctly befbre deleting the movies
on your canlcorder.
• If [Failed.] or [DISC BURN fhiled.] appears on
the screen, insert another disc into the DVD
writer and perfbrm the DISC BURN operation
again.
_Tips
• If the total memory size of movies to be burnt
by the DISC BURN operation exceeds that of
the disc, disc creation stops when the limit is
reached. The last movie on the disc may be
cut oft_
• Disc creation time to dub movies to the limit
of the disc is about 20 to 60 minutes. It may
take more time depending on the recording
mode or the nmnber of scenes. Also, if high
definition image quality (HD) is converted to
standard definition image quality (STD), image
quality conversion takes longer than the actual
recording.
To play backa disc on the DVD writer
(_) Connect the AC Adaptor and the power
cord (mains lead) to the DC IN jack of
your camcorder and the wall outlet (wall
socket) (p. 17).
@ Turn on your camcorder, and connect
the DVD writer to the _ (USB) jack of
your camcorder with the USB cable of
the DVD writer.
• _bu can play back movies on the TV
screen by connecting the camcorder to a
TV
(p.
31).
@ Insert a created disc into the DVD
writer.
The movies on the disc appear as
VISUAL INDEX on the camcorder
screen.
(_) Press the play button on the DVD writer,
• _bu can also operate by the camcorder
screen.
(_) Touch [END] ---+ [EJECT DISC] on the
camcorder screen and remow, the disc
after the operation is completed.
(g) Touch _ and disconnect the USB
cable.