Sony Handycam HDR-CX350 Operating Manual page 16

You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.
@ Notes
• 5_u cannot attach any "InibLITHIUM" battery pack other than the V series to your camcorder.
Turn offyour camcorder by closing the LCDscreen.
Attach the battery pack by aligning the battery terminals ((_) and
pushing the battery pack in the direction of the arrow ((]_)) until it clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Align the • mark on the DC
plug
with that on the DC IN jack.
The ,_/CHG (flash/charge) lamp lights up and charging starts. The ,_/CHG (flash/charge)
lamp turns off when the battery pack is fully charged.
When the battery is charged, disconnect the ACAdaptor from the DCIN
jack of your camcorder.
OTips
• See page 70 on recording and playing time.
• \Vhen your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
(;lose the LCD screen. Pushing the PUSH (battery release) button ((_)), remove the battery
pack in the direction of the arrow (@).
PUSH (battery release) button