Sony Handycam HDR-CX350 Operating Manual page 17

To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the batter), pack." Even if the batter), pack is
attached, the battery pack is not discharged.
Notes on the battery pack
• When you remove the battery pack or disconnect the A(" Adaptor, close the LCD screen and make sure
that the [_ (Movie)/_ (Photo) lamps (p. 23), the access lamp (p. 22) are turned ofi-_
• The _/CHG (flash/charge) lamp flashes during charging under the fbllowing conditions:
- The battery pack is not attached correctl3c
- The battery pack is damaged.
- The temperature of the battery pack is lox_c
Remove the battery pack fl'om your camcorder and put it in a warm place.
- The temperature of the battery pack is high.
Remove the battery pack fl'om your camcorder and put it in a cool place.
• When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FVI00
battery pack.
• We do not recommend using an NP-FV30, which only allows short recording and playback times, with
your camcorder.
• In the defimlt setting, the power turns off automatically if you leave your camcorder without any
operation fbr about 5 minutes, to save battery power ([A.SHUT OFF]).
Notes on the AC Adaptor
• Use the nearby wall outlet (wall socket) when using the A(" Adaptor. Disconnect the A(" Adaptor fl'om
the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow space, such as between a wall and l_arniture.
• Do not short circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
lnay cause a malfunction.
63
You ca n charge the battery pack in any countries!regions using the AC Adaptor supplied with
your camcorderwithin the AC lOOV r 240 v, 50 Hz!60 Hz range.
, Do n0t use an e!ectr0nic y0!tagetransformer •
_7