Sony Handycam HDR-CX150 Operating Manual page 32

Touch _ ---+EYES].
• When the A/V connecting cable is used
to output movies, movies are output with
standard definition image quality (STD).
Play back movies and photos on
your camcorder (p. 28).
Types of connection cables between
your camcorder and TV
Connecting toa highdefinition TV
Component A/V Cable (supplied)
(9
(Green) Y
(Blue)PB/CB
(Red)PR/CR
(White)
(Red)
COMPONENT
VIDEO IN
_ AUDIO
HDMI Cable (sold separately)
HDMI
@ iN
Connecting toa n0n-high-definiti0n 16:9 (wide)or4:3
TV
T
Component A/'_ Cable (supplied)
COMPONENT
(9
VIDEO IN
(Green) g _]
(Blue)PB/C_
(Red)PR/CR
(\Vhite)
(Red) AUDIO
A/V connecting cable with S VIDEO (sold
separately)
S VIDEO
@ VIDEO
(White)(Red) _
AUDIO
(Ydlow)
A/V connecting cable (supplied)
(9 (Yellow)
@ VIDEO
(\Vhite) (Red)
AUDIO
When connecting to your TV via a VCR
• Colmect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE (VIDEO
1,VIDEO 2, etc.).
To set the aspect ratio according to the
connected TV (16:9/4:3)
• Set [TV TYPE] to [16:9] or [4:3] according to
your T'_
When your TV is monaural (When your
TV has only one audio input jack)
• Colmect the yellow plug of the A/V COlmecting
cable to the video input jack and connect the
white (left channel) or red (right channel) plug
to the audio input jack of your TV or VCR.
When you connect with component
AN cable
• If you connect only component video plugs,
audio signals are not output. Connect the white
and red plugs to output audio signals.