Sony Handycam HDR-CX150 Operating Manual page 26

• The fbllowing states will be indicated if data is still being written onto the recording media after recording
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
- Access lamp (p. 22) is lit or flashing
- The media icon in the upper right of the LCD screen is flashing
_Tips
• See page 70 on the recordable time of movies.
• 5fbu can record photos during movie recording by pressing PHOTO fidly (Dual Rec).
• When a *;aceis detected, a white f)came appears and the image quality around the fhce is optimized
automatically ([FACE DETECTION]).
• 5fbu can specil_ the priority fi_ce by touching it.
• In the defimlt setting, a photo is recorded automatically when the camcorder detects the smile of a
person during movie recording (Smile Shutter).
• 5fbu can capture photos f_comrecorded movies.
• 5f_u can check the recordable time, estimated remaining capacity, etc., by touching _ (MENU)
[Show others] _ [MEDIA INFO] (under Q'_)[MANAGE MEDIA] category).
• The LCD screen of your camcorder can display recording images across the entire screen (lull pixel
display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel displa3c In this case, set [GUIDEFRAME] to
[ON], and record images using the outer fi'ame displayed on the screen as a guide.
• To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (@), and
then adjust the angle ((_)).
@ 90 degrees (rn_u'¢.)
@ 180
(_) 90 degrees to the
camcorder
• [It_tSTEADYSHOT] is set to [ACTIVE] in the ddhult setting.
Data code during recording
The recording date, time and condition are recorded automatically on the recording media.
They are not displayed during recording. Howew, r, you can check them as [DATA CODE]
during playback. To display them, touch _ (MENU) ---+ [Show others] ---+ [PLAYBACK
SET] (under _ [PLAYBACK] category) ---+ [DATA CODE] ---+ a desired setting ---+ tE! ---+
2;