Sony Handycam HDR-XR160 Operating Manual page 15

When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
To charge the battery using your computer
This method is useful when the AC Adaptor is not available.
(_) Turn off"the camcorder and attach the battery pack to the camcorder.
(g) Connect the camcorder to a running computer using the Built-in USB Cable.
_q
5 ¸
vo
To the wall outlet
(wall socket)
@ When the battery is fully charged, disconnect the camcorder from the computer (p. 40).
{_ Notes
• Operation with all computers is not assured.
• If you connect the camcorder to a laptop computer that is not connected to a power source, the battery
of the laptop computer will continue to use up its charge. Do not leave the camcorder connected to a
computer in this manner.
• Charging with a personally assembled computer, with a converted computer, or through a USB hub are
not guaranteed. The camcorder may not function correctly depending on the USB device which is used
with the computer.
Tips
• 5_u can charge the battery by connecting the Built in USB Cable to a wall outlet (wall socket) using an
AC US01AD/A@USOAG USB charger/AC Adaptor (sold separately). _!\m cannot use a Sony CP-AH2R
or CP-AL portable power supply device (sold separately) to charge the camcorder.
• The USB charger/AC Adaptor may not be available in some countries/regions.
• The CHG (charge) lamp or the _/CHG (flash/charge) lamp may not light up when the remaining battery
power is too low. In such a case, charge the battery using the supplied AC adaptor.
Charging time
Approximate time (rain.) required when you fully charge a fully discharged battery pack.
NP- FVSO (supplied) 1.5.5 315
NP-FV70 195 600
NP-FVIO0 390 1050
_5