Sony CCD-TR440PK Service Manual page 13

I
You can create your own video program by editing with any other • 8 ram, Him Hi8, _ VHS, S_ S-
VHS, _ VHSC, S_ S-VHSC, IQBetamax or _ ED Betamax VCR that has video/audio inputs.
After connecting the camcorder to the VCR,
(1) Turn the POWER switch to PLAYER.
(2) Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your
recorded tape into the camcorder.
(3) Play back the recorded tape on the camcorder until you locate the point where you want to start
editing. Then set the camcorder to playback pause mode.
(4) Set the recording VCR to recording pause mode.
(S) Press II on the camcorder and VCR simultaneously to start editing.
To Edit More Scenes
Repeat steps3 to 5.
To Stop Editing
Press • STOP on the camcorder and VCR.
Use of the EDITSEARCH button
To play back a tape in the forward or reverse directionkeep pressing EDITSEARCH during playback
pause. You can play back still picturessuccessivelyat specific intervals by pressing EDITSEARCH
intermittently.
Your camcorder is supplied with the lithium battery installed. The lithium battery lasts for about I year
under normal operation. When the battery becomes weak or dead, _'_ indicator flashes in the vlewfinder
forabout 5 seconds when you set the POWER switch to CAMERA. In thiscase,replace the battery
with the Sony CR2025 or Ouracell O1.-2025 lithium battery. Use of another battery may present a
risk of fire or explosion.
Note on Lithium Battery
Notethat thelithium battery hasa positive ( +) and anegative (-) terminals asillustrated, Be sureto
install the lithium battery so thatterminals on the battery match theterminals on the camcorder.
WARNING
The battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.
Caution
Keep the lithium battery out of the reach of children. Should the battery be swallowed, consult a
doctor immediately.
o
!
G
f
o
28 29