Sony Handycam HDR-CX360V Operating Manual page 61

•Total number ofmovie scenes or photos has
exceeded the r ecordable capacity of y our
calncorder (p. 63). Delete unnecessary images
(p. 36).
The r ecording stops.
•The t emperature of y our camcorder is
extremely high/lo_: Turn off y our camcorder
and leave itfor a while inacool/wann place.
"PMB"cannot be installed.
• Check the computer environment or
installation procedure required to install
"PMB" (p. 38).
"PMB" does not work correctly.
• Quit "PMB" and restart your colnputer.
The camcorder is not recognized by the
computer.
• Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
• Disconnect the USB cable from the computer
and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in an orderly manner.
• When both the built-in USB cable and other
USB cable (that is connected to the USB port
on the camcorder) are connected to external
devices at the same time, disconnect the one
that is not connected to a computer.
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your SoW dealer or local authorized SoW
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
c:04:rTr7
• The batter}, pack is not an "InfoLITHIUM"
battery pack V series. Use an "InfoLITHIUM"
battery pack (V series) (p. 14).
• Connect the DC plug of the AC Adaptor to
your camcorder securely (p. 14).
C:06:1_1_
• The hatter}, pack temperature is high. Change
the hatter}, pack or place' it in a cool place.
C:13:DD / C:32:DD
• Relnove the power source. Reconnect it and
operate your camcorder again.
E:rTrT:rTr7
• Follow the steps tk'om (_ on page 60.
c\_
• Batter}, power is lox_:
A(IB
6
• The batter}, pack temperature is high. Change
the batter}, pack or place it in a cool place. 5.
• No memory card is inserted (p. 22). o
r
• _ hen the indicator flashes, there is not
enough free space for recording images. Delete
unnecessary images (p 36), or for nat the
memory card after storing the images on other
media.
• The hnage Database File is damaged. Check
the data base file by touching _ (MENU)
[Setup] _ [_ (Media Settings)]
[Repair hng. DB F.] _ the recording medium.
• The memory card is damaged. Format the
memory card with your camcorder (p. 57).