Step I : Charging The Battery Pack - Sony Handycam HDR-CX560 Operating Manual

Step 1" Charging the battery pack
Battery pack
3
_/CHG (flash/charge) lamp
DC IN jack
AC Adaptor
-DC plug
Align the • mark on the DC plug
with that on the DC IN jack.
Power cord
(Mains lead)
To the wall outlet
(wall socket)
You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.
Notes
• 5_u cannot attach any "InIbLITHIUM" battery pack other than the V series to your camcorder.
Turn offyour camcorder by closing the LCDscreen after replacing the
viewfinder (HDR-CX700/CX700V).
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The _/CHG (flash/charge) lamp lights up and charging starts. The _/CHG (flash/charge)
lamp turns off when the battery pack is fully charged.