Sony Handycam HDR-CX560 Operating Manual page 37

When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V connecting
cable to the video input jack and connect the
white (left channel) or red (right channel) plug
to the audio input jack of your TV or VCR.
When connecting to your TV via a VCR
Connect yore" camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE (VIDEO
1, VIDEO 2, etc.).
When you play back standard definition image
quality (STD) movies on a 4:3 TV that is not
compatible with the 16:9 signal, record movies
with 4:3 aspect ratio. Touch _ (MENU) --_
[Image Quality/Size] --_ [ _ Wide Mode] --_
[4:3] --_ |.
When the A/V connecting cable is used to
output movies, movies are output with standard
definition image quality (STD).
On "Photo TV HD"
This camcorder is compatible with the
_'Photo TV HD" standard. "Photo TV
HD" allows for high(y-detai(ed, photoqike
depiction of subtle textm'es and colors.
By connecting Sow's Photo TV HD-
compatible devices using an HDMI cable _
or the component AV cable_L a whole
new world of photos can be enjoyed in
breathtaking full HD quality.
The TV will automatically switch to the
appropriate mode when displaying photos.
_ Setup of the TV will be necessar> Please refer
to the instructions of your Photo TV HD-
compatible TV for details.
¢D
8
¢Q
_D
,,<
¢%
If you connect ?Tour camcorder to the TV using
more than one t3,_)eof cable to output images,
the order of priority of the TV input jacks is as
tbllows:
HDMI --_ component --_ S VIDEO --_ video
HDMI (High Definition Multimedia Interface)
is an interface to send both video/audio signals.
The HDMI OUT jack outputs high quality
images and digital audio.
_7