Sony HT-SS380 Operating Instructions Manual page 11

[] AMP MENU
Displays the menu to operate the receiver.
[]
, t/!/.*/*
Press t/!/*/,_ to select the settings, then press
C) to enter/confirm the selection.
[] TUNING +/-
Scans a station (page 30).
PRESET +/-
Selects preset stations (page 31 ).
[] SOUND FIELD +**/-
Selects a sound field (page 33).
[]SHIFT
Changes the remote control button function to
activate the buttons printed in pink (page 10).
[] MASTER VOL +/- or .--'1 +/-
Adjust the vohnne level of all speakers at the
same time.
[] MUTING or _(
Turns off the sound temporarily.
Press the button again to restore the sound.
[] RETURN/EXIT 0"%
Returns to the previous menu.
[] AUTO VOL
Adjusts the vohune automatically depending on
the input signal or content from the connected
equipment (ADVANCED AUTO VOLUME
function).
This function is useful, for example, when the
sound of a commercial is louder than the TV
programs.
Notes
• Be sure to reduce the volume level before you
turn off this function.
• As this function is available only when Dolby
Digital, DTS or Linear PCM signals are input,
the sound may suddenly increase when you
switch to other formats.
• This function does not work ill the following
cases.
- Linear PCM signals with a sampling
frequency of more than 48 kHz are being
received.
- Dolby Digital Plus, Dolby TrueHD, DTS 96/
24, DTS-HD Master Audio, or DTS-HD
High Resolution Audio signals are being
received.
* If you press AV
I/_ ([])
and
I/_ ([_])
simultaneously, the receiver and connected
equipment will turn off (SYSTEM STANDBY).
The function of the AV I/(_) ([!]) changes
automatically each time you press the input
buttons ([_).
**The 5/TV, AUDIO, (_), _ and TV CH +/
SOUND FIELD +/PROG +/@ buttons have
tactile dots.
Use the tactile dots as references when operating
the receiver.
To control a Sony TV
Hold down TV (_6]), then press the button
printed in yellow to select the function you
want.
Example: Hold down TV (_6]), then press TV
CH + or PROG + (_]).
1 Hold
down
TV
@ (3
2 Press
TV CH +/PROG +
[]
[]
TV I/@ (on/standby)
Turns the TV on or off.
Numeric buttons**
Selects the TV channels.
ENTER
Enters the selections.
o_. (Previous channel)
Returns to the previous channel watched (for
more than five seconds).
CLEAR
Use with the numeric buttons to select the
channel numbers of the Digital CATV terminal.
For exainple, to select 2.1, press 2, CLEAR,
and 1.
(_ (Text)
Displays text information.
continued
11G8