Sony HT-SS380 Operating Instructions Manual page 10

Use the supplied remote control to operate this
receiver and other equipment. The remote
control is assigned to operate Sony audio/
video equipment. You can reassign the input
button to match the equipment connected to
your receiver (page 39).
• RM-AAU113 (Canada and
Argentina models only)
, RM-AAU114 (Other models)
_=
_=
---33
[]
--N
--N
/
To use the buttons printed in
pink
Hold down SHIFT ([_]), then press the button
printed in pink that you want to use.
Example: Hold down SHIFT ([_]), then press
ENTER (r_).
I .............. } PrN;ER
/ %
J
........................ 2...................... ,o
1
Hold down
SHIFT
To control the receiver
[] I/(_* (on/standby)
Turns the receiver on or sets it to standby mode.
Saving the power in standby mode
Wheu "CTRL HDM[" is set to "CTRL OFF"
(page 41 ).
[] Input buttons**
Selects the equipment you want to use. When
you press any of the input buttons, the receiver
turns on. The buttons are assigned to control
Sony equipment.
Numeric buttons**
HoM dowu SHIFT ([_), theu press numeric
buttons to preset or tune to the preset stations
(page 31 ).
ENTER
HoM dowu SHIFT ([_), then press ENTER to
- enters the selections.
- stores a station during tuner operation.
[] D.TUNING
Euters direct tuning mode (page 30).
[] MEMORY
Stores a station during tuner operation.
[] DISPLAY
Press AMP MENU, then press DISPLAY to
view' information on the display panel (page 28).
10G8